| « |
4.2 Round Tubular Heaters |
» |
|
|
|
Round Tubular Heaters can be manufactured depending on the diameter in lengths up to 6900 mm.
They can be delivered straight, bentable annealed or to bent according to customer’s drawings.
Round Tubular heaters are specially for air and fluid heating. In application where the required
watt density is not high they can be installed also in plates by pressing. In air- or fluidheating
application the heater is often assembled with a hexagon fitting pressed or welded on the tube near
the electrical connection. This is used for fixing and sealing functions. To calculate the watt
density in air/fluid heating application the important information are air/fluid speed and required
outlet temperature and control process.
Available dimensions and materials
 5,0 mm (1.4541 / 2.4068 )
(min. length: 250 mm / max length: 1000 mm)
6,5 mm (1.4404 / 1.4828 )
(min. length: 330 mm / max length: 3000 mm)
8,5 mm (1.4404 / 1.4571 / 1.4828 / 1.4876 / 2.4858)
(min. length: 330 mm / max length: 4500 mm)
10 mm (1.4304 / 1.4541)
(min. length: 330 mm / max length: 6900 mm)
Fixing:
Screw-in nipple M12 x 1,0 in brass
Screw-in nipple M14 x 1,5 in stainless steel
Terminals:
» Terminal pin
» Ceramic connector
» Blade terminal 6,3 mm
» Blade terminal with M4-screw bracket
» Threaded pin
» Threaded pin with nut and washes
» Leads
|
|
 |
|
|
|
Deutsch
Here you can send us an easy and quick inquiry. Just fill in the form as completely as possible.
