| « |
4.3 Screw in Tubular Heater |
» |
|
|
|
Screw in Tubular Heaters are the standard solution for all heating processes with liquids or
gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54
connection head, fitting and tubular heater consists of stainless steel. The tube sheath material
2.4858 is resistant to sulphite, phosphors and hydrochloride media.
All types are available
» without controller and limiter
» with controller (adjustable from 30° to 85°C, freezing protection at 7°C)
» with limiter (adjusted to 110°C)
» with controller-limiter-combination
| Wattage |
Voltage |
Thread |
IMM*¹ in mm |
H in mm |
L in mm |
D in mm |
H1 in mm |
| 2000W (3x 666W) |
3x 230V |
1½ G |
250 ± 10 |
132 |
382 ± 10 |
93,5 |
119 |
| 3000W (3x 1000W) |
3x 230V |
1½ G |
250 ± 10 |
132 |
382 ± 10 |
93,5 |
119 |
| 4500W (3x 1500W) |
3x 230V |
1½ G |
350 ± 10 |
132 |
482 ± 10 |
93,5 |
119 |
| 6000W (3x 2000W) |
3x 230V |
1½ G |
450 ± 10 |
132 |
582 ± 10 |
93,5 |
119 |
| 7500W (3x 2500W) |
3x 230V |
1½ G |
550 ± 10 |
132 |
682 ± 10 |
93,5 |
119 |
| 9000W (3x 3000W) |
3x 230V |
1½ G |
650 ± 10 |
132 |
782 ± 10 |
93,5 |
119 |
*¹IMM = Immersion depth
|
|
 |
|
|
|
Deutsch
Here you can send us an easy and quick inquiry. Just fill in the form as completely as possible.
