Cartridge heaters are cheap, robust and easy to install. Highly compacted they reach a surface watt density of up to 50 W/cm² and withstand highest stress. Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands. Other product description: spiral cartridge heaters [read more]
Our HotMicroCoil heaters have a varied operative range. Most important applications are nozzles for hot runner systems or hot melting nozzles. Continuous process improvement is the guarantee for our continuously high level of quality. Hot-/ MicroCoil heaters can be supplied coiled to your requirements or just straight to be coiled afterwards. For HotCoils it is also possible to integrate a thermocouple. Alternative product descriptions: coil heaters, nozzle heating elements, hot runner heating elements [read more]
When infrared energy strikes an object it is either absorbed, transmitted or reflected from the surface. Most materials encountered in industry are best suited for infrared heating as their maximum absorption occurs amidst the infrared spectrum at wavelengths between 2 - 10 µm. As infrared is a non-contact heating process, there is a rapid energy transfer from the heater to the product. Infrared heaters can be operated in vacuum or atmosphere. [read more]
Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time. Even though tubular heaters are technically rather mature and universal to use, there exist various new innovative solutions for many applications. Thus flexible tubular heaters (see chapter 4.1) have developed to be a new industry standard for the use in heating platens, welding bars and manifolds. Screw in tubular heaters are standardised for use in liquids like water. Finned tubular heaters are especially for air-heating-cabinets or tunnels. [read more]
Heating bands are the ideal solution for the heating of tubes an cylinders. UGL is a mica nozzle heater, made with a plastic-tight stainless steel casing and available with thermocouple on request. UGL is in many dimension available from stock (table page 2). For all other dimensions (dia < 70 mm) you could use micaflex. The Ceramic heating band type Keraplast is suitable specially for applications with high watt density and therefore for higher temperatures. [read more]
Thermo sensors are needed in any controlled heating process. For various applications different types of thermocouples are obtainable. Most common are thermocouples (TC) and resistance sensors (RS). Both types are available in the same executions as a matter of princible. For non-contact measuring infrared sensors are the rights choice, either in stationary executions or as portable measuring instrument. [read more]
Goal achieved! The result of many years of experience in developing temperature measuring and controlling technology is our JC-series, equipped with ingenious hard- and software, suitable for simple controlling systems. We have the JC-series impresses by its optimized function range, a very good controlling performance, simple operation as well as a competitive price. [read more]
Flat heating elements are used wherever a flat side has to be heated symmetrically and effectively. Constructed of winded heating wire and two shifts of insulation, custom-made adaption to nearly any surface dimension is possible. Simultaneously an optimal heat allocation over the heated flat side is achieved. Working temperatures up to 450°C (exceptions up to 600°C) and surface load up to 5 W/cm² are possible at optimal heat transition. [read more]
Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. [read more]
For the electric connection and safety of our heating elements, special materials are needed. In this chapter you can find suitable leads and sleeves as accessories. The connection technology in areas with more than 100°C permanent temperature should use suitable connectors and terminations. All listed leads, sleeves, terminations and connectors normally are in stock or can be supplied at short notice. We have listed only the most popular articles, should you need anything else, please do not hesitate to contact us. [read more]
Here you can find inquiry forms for: Cartridge Heaters, HotMicroCoil Heating Elements (nozzle heating elements, coil heaters), Ceramic HeatersTubular Heaters, Controller, Drum Heaters, Silicone Heaters [read more]
Here you can order our product catalogue and / or our CD-Card online at no cost. [read more]
Deutsch
Cartridge heaters are cheap, robust and easy to install. Highly compacted they reach a surface watt density of up to 50 W/cm² and withstand highest stress. Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands.
Other product description: spiral cartridge heaters
Our HotMicroCoil heaters have a varied operative range. Most important applications are nozzles for hot runner systems or hot melting nozzles.
Continuous process improvement is the guarantee for our continuously high level of quality. Hot-/ MicroCoil heaters can be supplied coiled to
your requirements or just straight to be coiled afterwards. For HotCoils it is also possible to integrate a thermocouple.
When infrared energy strikes an object it is either absorbed, transmitted or reflected from the surface. Most materials encountered in industry are best suited for infrared heating as their maximum absorption occurs amidst the infrared spectrum at wavelengths between 2 - 10 µm. As infrared is a non-contact heating process, there is a rapid energy transfer from the heater to the product. Infrared heaters can be operated in vacuum or atmosphere.
Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time. Even though tubular heaters are technically rather mature and universal to use, there exist various new innovative solutions for many applications. Thus flexible tubular heaters (see chapter 4.1) have developed to be a new industry standard for the use in heating platens, welding bars and manifolds. Screw in tubular heaters are standardised for use in liquids like water. Finned tubular heaters are especially for air-heating-cabinets or tunnels.
Heating bands are the ideal solution for the heating of tubes an cylinders. UGL is a mica nozzle heater, made with a plastic-tight stainless steel casing and available with thermocouple on request. UGL is in many dimension available from stock (table page 2). For all other dimensions (dia < 70 mm) you could use micaflex. The Ceramic heating band type Keraplast is suitable specially for applications with high watt density and therefore for higher temperatures.
Thermo sensors are needed in any controlled heating process. For various applications different types of thermocouples are obtainable. Most common are thermocouples (TC) and resistance sensors (RS). Both types are available in the same executions as a matter of princible. For non-contact measuring infrared sensors are the rights choice, either in stationary executions or as portable measuring instrument.
Goal achieved! The result of many years of experience in developing temperature measuring and controlling technology is our JC-series, equipped with ingenious hard- and software, suitable for simple controlling systems. We have the JC-series impresses by its optimized function range, a very good controlling performance, simple operation as well as a competitive price.
Flat heating elements are used wherever a flat side has to be heated symmetrically and effectively. Constructed of winded heating wire and two shifts of insulation, custom-made adaption to nearly any surface dimension is possible. Simultaneously an optimal heat allocation over the heated flat side is achieved. Working temperatures up to 450°C (exceptions up to 600°C) and surface load up to 5 W/cm² are possible at optimal heat transition.
Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set.
For the electric connection and safety of our heating elements, special materials are needed. In this chapter you can find suitable leads and sleeves as accessories. The connection technology in areas with more than 100°C permanent temperature should use suitable connectors and terminations. All listed leads, sleeves, terminations and connectors normally are in stock or can be supplied at short notice. We have listed only the most popular articles, should you need anything else, please do not hesitate to contact us.
Here you can find inquiry forms for:
Here you can order our product catalogue and / or our CD-Card online at no cost.
